Mini Camera QQ5
Availability: 1In Stock
Exchange within 14 daysWe will exchange the device within 14 days. If it does not suit you.
Dispatch within 1-2 daysWe will ship your item within 1-2 business days. If product status In Stock.
Guarantee of anonymity
USA and Europe stockProduct in stock in the warehouses of the USA and Europe.
| || |
Charging mini camcorders
Attention! Before first use you must fully charge the battery mini camera!
This mini camcorder has a built-in rechargeable Li-ion battery. You can charge one of the following ways:
After the battery mini camera is fully charged the red led will light steadily.
- Note. If the internal battery is not sufficient to continue shooting blue and red led mini camcorders will be blinking for 5 seconds, after which a mini camera will save the recorded video and will be automatically disabled.
- Note. If the memory card is not inserted, blue and red LEDs mini video cameras will be blinking for 10 seconds, after which the mini camcorder will automatically turn off.
- Note. If the remaining free space on the memory card is insufficient to continue shooting, blue and red micro LEDs will be lit.
- Note. If the camcorder is in standby mode and with it there is no operation, it turns off automatically after 1 minute to conserve the internal battery.
· Video recording modes
- Shooting video with a resolution of 1280X720P
Press the On/Off button to activate mini video camera – red and blue led will light up simultaneously and then blue led goes out and the red will stay on constantly – mini camera is in standby mode video recording with quality 720p. Press the On/Off button once to start recording – the red led will blink slowly. The video will be automatically saved every 3 minutes.
- Shooting video with a resolution of 1920X1080P
Press the On/Off button to activate mini video camera – red and blue led will light up simultaneously and then blue led goes out and the red will stay on constantly. Double-press the Mode button to switch to shooting mode 1080p video – red and blue led will be lit at the same time, a camera is in the standby mode of video recording at 1080p. To start recording press the On/Off button once, blue led will blink slowly and the red light continuously. The video will be automatically saved every 3 minutes.
- Recording motion sensor
This mini camcorder can start recording via the built-in motion sensor. To do this, in idle mode, shooting 720p or 1080p video, press and hold the On/Off button a mini video camera for 2 seconds, blue and red LEDs will blink simultaneously 3 times – micro camcorder is in recording mode by the motion sensor.
Press the On/Off button to activate mini video camera – red and blue led will light up simultaneously and then blue led goes out and the red will stay on constantly. Momentarily press the Mode button mode to start photographing, the red led will turn off, the blue will light steadily. To take the photo, press the On/Off button – blue led will blink once the picture has been saved. The resolution of the resulting photos – 4032х3024.
Night mode backlight
Press the On/Off button to activate mini video camera. Press the power button night illumination, blue led indicator will blink twice and night lights included. To turn off nighttime illumination, press the power button the lighting again, the blue led will blink four times: night light off.
Off mini camera
In order to disable mini video camera press and hold the On/Off button for 4 seconds. If the mini camcorder is in standby and not being used, it will automatically turn off after 1 minute.
Restart mini camera
If a video camera is not working properly, or does not respond to pressing buttons, You can restart it by simultaneously pressing and holding for 3 seconds the buttons On/Off and Mode mini camera.
Connect the mini camera off to PC – after a few seconds it will automatically be defined as a removable disk on Your PC. The blue indicator will indicate the process of information transfer, and red – charging the internal battery.
In order to connect it to a video camera in the webcam, install the drivers on the disc complete with a mini camcorder, then connect the mini camera with the help of the MicroUSB cable while holding the Mode button.
Setting the date and time
Connect a camcorder to a PC. Time setting is performed by creating a text file called TIMERSET.txt in the root directory of the memory card device, with the following contents:
YYYYMMDDHHMMSS Y (or N if You do not want to mark the date and time visible on the video)
For Example, 20130625140003 Y
After saving the file, unplug the mini camera from the computer and turn it on.
|Active mode :||until 2 hours|
|Battery life:||until 4 days|
|Frames per second:||30fps|
|Memory:||until 64 Gb|
|Minimum illumination:||1 Lux|
|Working temperature:||‘-5 +45|
|Dimensions (L x W x H)||54.00 x 25.00 x 23.00|